Standard Style:

Face Materials:      Stellite, Carbon, Ceramic, Tungsten Carbide, Silicon Carbide, Lecrolloy

Metal Parts:            SS 316, SS 304

Secondary Seal:      Elastomers, PTFE

Applications

Water Pumps

Circulation Pumps for central heating

Chemical Process Pumps

Sewage and Submersible pumps

Seal Characteristics:

Single acting

Unbalanced

Inside mounted

Dependent of direction of rotation

Operating Limits:

Shaft Diameter d1 : 9 ... 100 mm
Pressure p : 10 bar (max)
Temperature t : _20 + 1200 C
Velocity v : 20 m/sec


single conical helical spring, unbalanced seal with '0' ring as secondary sealing member. Various seal face materials and elastomers can be offered for wide service application. As the torque transmission is done by conical helical spring these seals are dependent of the direction of rotation. Direction of rotation is seen from the drive end of the shaft. Clockwise rotating shaft requires right handed spring and anticlockwise rotating shaft requires left-handed spring. For easier fitting, the conical helical spring should be pushed on the shaft with a twisting motion in the sense of the spring unwinding. This movement enlarges the diameter of the spring, enabling easy fitment.

Standard Style:

Face Materials:      Carbon/Stellite / Lecrolloy / Ceramic / Silicon Carbide / Plasma Sprayed Ceramic

Metal Parts:            SS 316, SS 304

Secondary Seal:      Nitrile, EPDM, Viton, PTFE

Applications

Industrial

Marine

Seal Characteristics:

Single acting

Balanced / Unbalanced

Inside & Outside Mounted

Independent of direction of rotation

Torque Transmission by Secondary seal

Operating Limits:

Shaft Diameter d1 : 10 ... 100 mm
Pressure p : 10 bar (max)
Temperature t : – 20 ... +180O C
Velocity v : 10 m/sec>

This seal has self aligning feature which compensate abnormal shaft end play and run out, which leads to improved service life. Secondary seal protect shaft and sleeve from fretting. Drive to the seal faces is given through notches - provided on retainer. Seal can be repaired in field with minimum spares minimising the down time cost

Description / Specification of Multi Spring

We are involved in offering a wide range of Multi Spring to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Multi Spring. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Textile seals for used to yarn & fibre dyeing plants & cloth dyeing application plants, high speed jet dyeing plants, Specially designed U1951 type seal used for diaphragm elastomer to normal pressure machine like a mercerizing machine & pretreatment machine (Benninger -Make) for used different type of caustic & acidic media. In one machine required two pairs of diaphragm seals to fit opposite side of machine. The diaphragm protect the bearing & other machine parts for media contact.

To Be Use For:

Caustic

Acidic

Sodium Hydrogen Carbonate

Operating Limits :

Shaft Diameter : As per machine required

Pressure : Normal

Temperature : Normal

Material Of Construction :

Sealing faces : Carbon, Silicon Carbide, Tungsten Carbide, Chrome Cast Steel & which are suitable for fluid

Elastomer :Viton, EPDM, Silicon, Aflas, PTFE, Hypalon

Hardware : SS 316, Hastelloy C, Monel, Alloy 20

Part Of Identification :

Rotary Face (Seal Ring)

Stationary Face (Mating Ring)

Elastomer
Spring
Other Hardwere

Standard Style:

Face Materials:      GFT / CFT / Silicon Carbide / Ceramic

Metal Parts:            SS 316, SS 304, Hastelloy-C

Springs :             Teflon Covered Spring Steel, S.S.316 , S.S.304 , Hastelloy-C

Secondary Seal:      PTFE Bellows

Applications

Extremely corrosive services

Seal Characteristics:

Single acting

Outside mounted

Multi Spring & Single Spring Design

Independent of direction of rotation

Operating Limits:

Shaft Diameter d1 : 19mm to 150mm
Pressure p : 6 bar (max)
Temperature t : -45 ....+1200C
Velocity v : 16 m/sec

Specially designed for extremely corrosive chemicals, including concentrated acids, salts, strong oxidising and reducing agents, and chemically active organic compounds. All components which come in contact with the liquid being sealed are made of chemically inert material. Metallic components clamping ring and springs are located outside the media. In this seal series Glass filled PTFE face is composite moulded with highly flexible PTFE bellows.

These Mechanical Seals are extremely useful in high temperature and other complicated services. Special welding process is used on rare materials to form highly accurate and precise Bellow hence it is expensive and used in ultimate services. These Mechanical Seals are Non-Pusher and Balanced in nature. Bellow is having self cleaning action and axial movement hence do not have dynamic elastomers which overcome several dis-advantages of Pusher Seals. These are available in double configuration & cartridge assemblies too. It finds great usage in Hydrocarbon, Pulp & Paper, Steel,Mine & Power Industries. We have very long experience in reconditioning of Metal Bellow Seals.

Application:

High Temperature, Hydrocarbons & Critical Services

Operating:

Pressure : 25 bar
Temperature : -40°C to 350°C
Speed : 20 m/s
Sizes : 25 mm to 100 mm

Materials:

Faces : Carbon, Silicon Carbide, Tungsten Carbide.
Elastomers : Graphite, Perflouro, FEP.
Hardware : SS-316, AM-350, Hastelloy-C, Alloy-20

Standard Style:

Face Materials:      Carbon/ Ceramic / Silicon Carbide / Tungsten Carbide

Metal Parts:            SS 316, SS 304

Secondary Seal:      Elastomers

Single Acting, Dependent of Direction of Rotation

Applications

Boiler feed water Pumps

HSD Pumps

Booster Pumps

Drip Pumps

Condensate Pumps

Fuel Oil Pumps

Seal Characteristics:

Single acting

Balanced

Inside mounted

Dependent of direction of rotation

Operating Limits:

Shaft Diameter d : 65 ... 150 mm
Pressure p : 50 ... 140 bar (max)
Temperature t : – 20 ... +250O C (API plan 23)
Velocity v : more then 50 m/sec

This is a unique seal developed to meet stringent technical requirements of Boiler feed water pumps.

Rotating mating ring design makes it suitable for high speed application and avoids critical requirments of stuffing box face squareness.

Both the faces are having strong positive drive and locking arrangment which make seal very strong and sturdy.

Thermodynamic circulation grooves inscribed on the rotating faces boost the cooling of the sliding faces by reducing the coefficient of friction and protecting the seal against thermal over loading.

Increased collent flow effected by the pumping screws and the fluid guiding channel combine to force the cold water into the gap between seal ring and mating ring, blowing out gas bubbles and dirt praticles and picking up frictional heat.

In view of risk of dynamic distortion because of high sliding velocity of over 25 m/sec the springs are located in the stationary part.

Standard Style:

Face Materials:      Carbon / Silicon Carbide / Ceramic

Metal Parts:            SS 316, SS 304

Secondary Seal:      Elastomers

Applications

Utility Pumps

Transfer Pumps

Agitator and Vessels (As Dry Running Seal)

Seal Characteristics:

Fully Split Components

Ease of Installation

Balanced Seal Faces

Operating Limits:

Shaft Diameter d : 50....200 mm
Pressure p : 15 bar (max)
Temperature t : Amb.... 1400 C
Shaft speed : 3600 rpm (max)

The multi spring design keep the faces uniformely in contact. The split seal face is balanced covered with split O-Ring as a sealing member. Slots provided in the housing facilitates fitting the seal on various equipments with different PCDs.

Standard Style:

Face Materials:      Carbon / Silicon Carbide / Tungsten Carbide

Metal Parts:            SS 316, SS 304, Hastelloy-C,Titanium, Alloy-20, Monel

Secondary Seal:      Elastomers

Applications

Oil Pipeline Pumps

Boiler Feed Water Pumps

Seal Characteristics:

Single acting

Balanced

Inside Mounted

Independent of direction of rotation

Multiple springs design

Sturdy drive mechanism

Operating Limits:

Shaft diameter d1 : 25.....115 mm
Pressure p : 25....150 bar
Temperature t : _ 40.....1800 C
Velocity v : 20 m/sec

Specially designed cartridge seal for pumps handling oil, water and other fluids which are being pumped at very high pressure. These seals are widely used on pipe and Boiler feed water pumps. Very sturdy design and drive arrangement makes the seal suitable for very high pressure. This being multiple spring seal, it provides uniform face loading.

Function:

The shaft seal type SPE is a single-acting bidirectional mechanical seal. It was specially designed for sealing against abrasive products and is used for flooded side entering applications. The seal rings are surrounded, lubricated and cooled by the product. The hydraulic design and the preload of the springs are arranged in such a way that the seal gap of the highly wear-resistant pair of seal rings (Silicon carbide) is reliably lubricated. This makes any hydraulic installation superfluous, i.e. in the plant no additional seal liquid supply systems need be used. The temperature in the seal gap is so low that no evaporation of the fluid in the seal gap occurs. Springs, drive pin and o-rings are protected against caking.

Application:

The SPE is the most used mechanical seal in FGD-agitators worldwide. Special metallic materials for product-wetted components give reliable protection against corrosion, also in the use of aggressive media. If highly aggressive media are used and the highest safety conditions are necessary, the product-wetted components can be manufactured in a special plastic which is highly corrosion-proved.

The main areas of application are:

• Flue gas desulfurization (FGD)
• Hydrometallurgy
• Pharmacy
• Biotechnology

Materials:

Housing: Stainless steel 
Product-wetted parts: Stainless steel, Hastelloy, Titanium, special materials
Seal rings: Carbon, Silicon Carbide, Tungsten Carbide, etc
O-rings: Viton, EPDM, Perfluor elastomers, special elastic materials
FDA-approval: Possible for all product-wetted parts

Application Limits :

Vessel pressure: Vacuum ...16 bar (abs.) 
Vessel temperature:-50 … +200° C
Shaft size: 40 ... 300 mm
Sliding speed: 5 m/s

Quality :

SEAL PROOF is supplied ready for installation as a cartridge unit. Prior to delivery every mechanical seal is dynamically tested under process conditions according to an internal QM System and receives a test certificate. The seal type SPE is designed to optimum GMP requirements and is TÜV certified for applications in hazardous.

Standard Style:

Face Materials:      Tungsten carbide and ceramic, secondary seal

Metal Parts:            SS 316, SS 304, Hastelloy - C, Hastelloy - B, Monel, Alloy - 20

Secondary Seal:      Elastomers, TCV,PTFE

Dry Running Seal

For Top Entry Agitators, Vessels and Mixers Single Acting, Independent of Direction of Rotation

Applications

Food Products

Pharmaceutical Products

Seal Characteristics:

Single acting

Reverse Balanced

Outside Mounted

Independent of Direction of rotation

Dry Running

Operating Limits:

Shaft Diameter d : 15 ...150mm*
Pressure p : Vacuum .... 8 bar (max)
Temperature t : Amb. .... 120O C (max)
Speed n : 320 rpm

Factory assembled and dynamically tested seal for steel, glass lined and SS mixers, agitator and vessels. This is a multiple spring externally mounted, reverse balanced seal with O-ring as secondary sealing member. Various elastomers can be offered for wide service application. These seals are basically used on top entry agitators as dry running seals. When food products or pharmaceutical products are agitated in agitator, mixing of any other liquid will contaminate the product and affect its quality, hence these dry running seals are used. These seals don't require any external media for lubricating the faces, that is why they are known as dry running seals.

Standard Style

Face Materials:      Carbon , Ceramic, Silicon Carbide, Tungsten Carbide, Lecrolloy

Metal Parts:            SS 316, SS 304, Carbon Steel, Hastelloy-B,Hastelloy-C, Monel, Alloy - 20

Secondary Seal:      Inboard - PTFE, GFT : Outboard - Elastomers

For Top / Side Entry Agitators, Vessels and Mixers Double Acting, Independent of Direction of Rotation

Applications

l Petrochemicals and its vapours

l General Chemicals and its vapours

l Light hydrocarbons and its vapours

Seal Characteristics

Double acting Back to Back Seals

Balanced

Cartridge Unit

Independent of Direction of Rotation

Operated with Pressurised Barrier Fluid

Operating Limits

Shaft Diameter d : 25 .....150mm*
Pressure p : Vacuum .... 35 bar (max)
Temperature t : Amb. ... 2000c (max)
Shaft speed n : 600 rpm. (max)
Barrier fluid pressure : Vessel pressure + 1.5 bar
Factory assembled cartridge units used on mixtures, agitators and reaction vessels. The seals are designed for handling severe services including products emitting toxic vapours during reaction process. The design incorporates bearing located very close to the seal. This standard feature effectively arrests the shaft whip for smooth and trouble free operation enabling enhanced seal life. The cooling jacket, also a standard feature, helps to maintain cool environment around the seal. Large clearance between rotating shaft/sleeve and mating ring permits higher deflection of the shaft, invariably associated with top entry agitators.

Thermosyphon Systems

Performance Limits

Capacity : 7.5 Liter
Hyd. Test Pressure : 30 Kg
Working Pressure : 20 Kg
Max. working temp.: 180°C
Heat Transfer area of cooling coil : 0.3m²
Cooling water flow rate

Recommended: 12 Ltrs /min

Max. Level Value : 5.5 Ltrs
Min. Level Value : 3.5 Ltrs

Metal Parts

Thermosyphon Shell : Carbon Steel / SS 316/SS304
Cooling Coil: SS 304 / SS 316>

Accessories

Pressure Gauge (0- 40 kg/c m²)
For Pressure Measuring of the vessel
Level Gauge For Liquid Level Indicate of the vessel
Hand Pump For recharge of the vessel With additional quantity of barrier fluid when Thermosyphon is under pressure and Liquid level is low.

Connection Size:

Buffer fluid Inlet - A ½" NPT
Buffer fluid Outlet – B ½ NPT
Cooling water Inlet – C ½" NPT
Cooling water Outlet – D ½" NPT
Hand Pump Connection – E – ¼: NPT (Refilling Connection)
Filling Connection – F –1 ¼" NPT
Pressure Gas Connection – G ½" NPT
Pressure Gauge Connection – H 3/8" NPT
Drain – I ½" NPT
Safety Valve Connection – J ½" NPT

Thermosyphon vessels can be used to provide a source of clean, Pressurized barrier fluid to Double mechanical seals in back to back and nonpressurised buffer fluid for tandem seal Arrangement. The Barrier fluid enters the Thermosyphon Vessel, where it is cooled by water circulating through cooling coil to bring down the temperature of barrier fluid and back to the seal chamber. Super Thermosyphon arrangement is very effective.

End Suction, Horizontal, Centrifugal Coupled Pumps With Semi Open Impeller

General

Non clogging tendency
Handle light slurries
Without problems
Micrometric wear adjustable facility hence
Worries at constant head for longer period
Grease/Oil lubricated bearing
Dynamically balanced impeller
Less noise
No vibration
Centre delivery
No Air locking

Applications

Operating Range

Capacity - Q- Up To     80 M3/Hr.
TDH H - Up To             62 Mtr.
Pump Sizes - DN         25 mm To 50 mm
Speed - N -                1440/2880 rpm at 50 Hz and 1750/3500 rpm at 60 Hz
Temperature               110 C

Material of Construction

Optional Accessories

M.S. Fabricated Base Frame/Flexible Coupling/Coupling Guard/Foundation Bolt.

S.S. Centrifugal Monoblock Pump

General

SEAL PROOF has indigenously developed chemical process corrosion resistant pumps in wide range of application. Seal proof pumps are specially engineered and designed to exceed the requirement of all industry. The surest way of conveying, mixing, transferring and propelling without leakage and without maintenance.

All rotating parts are dynamically balanced results Vibration free operation

Longer life of bearings – low noise

Motor designed for wide voltage range 300-450 volts hence no fear of burn out due to voltage fluctuation and additional advantage of space saving – elimination of base plate special coupling and its guard

Applications

Operating Range

Capacity - Q- Up To     120 M3/Hr.
TDH H - Up To             60 Mtr.
Pump Sizes - DN         25 mm To 100 mm
Speed - N -                   1450/2900 rpm
Temperature               up to 80 C for P.P. & other M.O.C. up to 250 C

Material of Construction

Graded Grey Cast Iron , S.S.316, 304, Polypropylene

All Wetted Parts Of Cast Iron /Gun Metal/SS-316/ Polypropylene

This Pumps are Designed to meet the hygienic requirements of the dairy, food and beverage, and personal care industries, Dairy Pumps standardized centrifugal pump for general applications, intermittent product pumping and CIP duties.

Solid value

The Dairy pump is a standard duty pump for basic transport duties in hygienic applications. An exceptional value compared with other pumps in its class, it provides reliable, low-maintenance operation. With its hygienic design, cost-effective operation and quick, easy maintenance, this pump offers excellent value for money. For more demanding duties, Seal Proof offers the premium centrifugal pump. Using our pump selection software, Seal Proof or one of our sales and working partners can help you select the right pump for your specific application.

Solid hygienic design

Dairy centrifugal pumps ensure consistent performance and maximum cleanability. The pump interior is designed to provide control of surface contamination and feature O-rings with defined compression. Thus give an excellent level of hygiene. Engineered for high product integrity, the Dairy Pump has a semi-open impeller, which provides gentle product handling. Smooth crevice-free surfaces eliminate any dead zones where bacteria can thrive. In addition, the Dairy Pump is easy to clean in place and employs FDA-approved elastomers.

Easy, low-cost maintenance

A few minutes are all that is required to change wear parts. Hassle-free replacement of the easy-to-access front-loading shaft seal, for instance, maximizes uptime and minimizes maintenance costs. Other features that contribute to solid maintenance routines and cost savings are the easy-to-disassemble clamp between casing and back plate and easy-to-mount O-ring.

Single Stage End Suction Back Pull-out Type Centrifugal Pumps

General

"SEALPROOF ENGINEERING has indigenously developed chemical process corrosion resistant pumps in wide range of application"

Horizontal
Foot mounted
single stage
End suction and top centerline discharge confirming to DIN 24256/ISO 2858 standards and in general confirming to API 610 as well.

Applications

Operating Range

Capacity - Q- Up To     1100 M3/Hr.
TDH H - Up To             150 Mtr.
Pump Sizes - DN         25 mm to 300 mm.
Speed - N -                   960/1450/2900rpm at 50 Hz and 1150/1750/3500 rpm at 60Hz
Temperature               350 C

Material of Construction

Optional Accessories

M.S. Fabricated Base Frame/Flexible Coupling/Coupling Guard/Foundation Bolt.

Boiler Feed High Head Self Priming Pumps

General

SEALPROOF engineering has indigenously developed chemical process corrosion resistant pumps in wide range of application. Seal proof pumps are specially engineered and designed to exceed the requirement of all industry. The surest way of conveying, mixing, transferring and propelling without leakage and without maintenance.

Applications

Operating Range

Capacity - Q- Up To     20 M3/Hr.
TDH H - Up To             250 Mtr.
Pump Sizes - DN         15 mm To 50 mm
Speed - N -                   1450 rpm at 50Hz and 1750 rpm at 60 Hz
Temperature               90 C
Pressure                       26 bar.

Material of Construction

Optional Accessories

M.S. Fabricated Base Frame/Flexible Coupling/Coupling Guard/Foundation Bolt.

Single Stage Horizontal Centrifugal Self Priming End Suction Coupled Pumps

General

Easily portable with trolley arrangement suitable for motor as well as engine drive compact mono block version also available along life due to replaceable wearing parts grease lubricated deep groove ball-bearing.

Applications

Operating Range

Capacity - Q- Up To     650 M3/Hr.
TDH H - Up To             50 Mtr.
Pump Sizes - DN         40 mm To 200 mm
Speed - N -                   1440/2880 rpm at 50 Hz and 1750/3500 rpm at 60 Hz
Temperature               110 C

Material of Construction

Optional Accessories

M.S. Fabricated Base Frame/Flexible Coupling/Coupling Guard/Foundation Bolt.

Applications:

User Industries:

Operating range:

Material Combinations:

Optional features:

Horizontal end suction back pullout type centrifugal pump as per DIN 24256 mounting standards upto 150 mm NB discharge and as per SEAL PROOF specifications from 200 mm to 350 mm NB discharge

Vertical Sealless glandless Sump Pumps

General

SEALPROOF has indigenously developed chemical process corrosion resistant pumps in wide range of application. Seal proof pumps are specially engineered and designed to exceed the requirement of all industry. The surest way of conveying, mixing, transferring and propelling without leakage and without maintenance.

The shaft is supported from its upper end by a grease lubricated ball bearing lateral supporting of shaft is obtained through radial bush bearing made out of various antifriction materials property chosen according to specifications of fluid handled
 

Applications

Circulation Of Industries Water
Acidic And Acidic Water In Metal And Sewage Treatment Plants
Chemical Waste Water Handling

Material Of Construction

Cast Iron
Carbon Steel
WCB
Alloy Steel
CF8
CF8M
CF3M
CF3
Alloy- 20
P.V.D.F.
Polyproplyene(PP)

General

The leading manufacturer of non-metalic pumps, Seal Proof now presents the SPE Series Lined pumps specially designed to handle a wide spectrum of highly corrosive media. It uses a hi-tech lining process, free from adhesive bonding. This eliminates peeling off of the lining from the metal body unlike other lined products. Rigorous quality checks through out the lining process ensures years of trouble. free operation. These pumps are available in a variety of lining materials to withstand severe corrosion and temperature conditions.

Features:

The hi-tech lining process involves high prssure moulding at high temperature to ensure uniform thickness of lining free from cavaties, air pockets, cold flows etc. A unique feature is the dove-tail grooves provided on the metal casing and backplate. This ensures a firm grip between the metal and lining material. A dynamically balanced, solid moulded, semi-open impeller with metallic insert gives mechanical strength and durability.

Material of Consturction

The SPE Series lined pumps are available in the following materials. LINING : PFA-(Teflon), FEP-(Teflon), PVDF

Casing and Backplate

Cast Steel, Stainless Steel 316. The M.O.C. is selected on the basis of the compatibility and temperature of the fluid handled as per the specific requirement. The pumps are available for high head and capacity.

Shaft

Shafts are designed for high torque and power transmission with minimum vibration, deflection and noise level.

Sleeve

The sleeves are glided over the shaft, protecting it from corrosive application. Materials: Ceramic, Alloy-20, Hasteloy-c, Hasteloy-B, Monel, Titanium, Silicon Carbide etc

Mechanical Seals

Available with an option of being mounted either externally or internally. The pumps are fitted with specially designed single or double seals with suitable faces along with quenching arangement & necessary.

Gaskets

To ensure firm sealing, PTFE gaskets are provided at the joints

Casing / Backplate

The wetted areas are lined with compatible polymer. The casing has a rugged foot- mounting which is capable of handling high pressure, piping loads and system pressure. Concentric dove-tail grooves ensure a firm grip between the metal body and lining.

Impeller

The impeller has a radial semi- open design, with large contoured flow passages. It is one piece, of robust construction, dynamically balanced and is provided with back vanes to minimise axial thrust for enhanced bearing life.

Applications and Industries Served

• Chemical processing
• Drugs and Pharmaceuticals
• Petrochemicals
• Effluent Treatment
• Food processing
• Fumes scrubbing
• Agro chemicals
• Tanneries
• Perfumeries
• Detergents and caustics
• Breweries
• Acid pickling
• Dyes and pigments
• Tanneries
• Paper and Pulp industries
• Photographic processing

QUALITY:

Seal Proof keeps a very keen eye on Quality control at every stage during the manufacturing of each and every product.

Seal Proof seal less Magnetic Driven Pump :

Seal Proof centrifugal Magnetic pump Comes in PVDF , P.P. & Stainless Steel, is now introduced in response to the process industry's growing concern for the environment, the safety of plant personnel, and the high ongoing cost of mechanical seal maintenance. It is an ideal pump for use in installations handling toxic, noxious, inflammable or corrosive liquids such as NOx or freon gas where leakage to atmosphere cannot be tolerated

Seal less :

Pump age is hermetically sealed in a thick, rugged stainless steel pump casing. magnetically driven, seal less pump- construction assures you of leak freeness. The Pump never soils surroundings, but maintains safe and clean environment.

Drastically saves Maintenance Costs :

Silicon Carbide wet bearings, the core of pump, extensively reduce wear and corrosion, and provide extremely long life ( interchangeable front and rear). It allows customers to hold a minimum number of parts, and spares them many a maintenance work for a long period of time.

Seal - less features make these pumps perfect for environments subject to federal regulations

1. Chemical
2. Pharmaceuticals
3. Textile Processing & Dye Baths
4. Electroplating
5. Various metal Recovery Systems
6. Metal Finishing
7. Colour Photo Processing
8. T. V. Tube Processing
9. Food Processing : Dairies, Soft Drinks, Beverages
10. X-Ray Film
11. I.C. Photo Engraving Process / PCB Plants
12. Refrigeration & Chilling Plants
13. Water Treatment Plants
14. Galvanizing / Anodizing Plating Plants
15. Etching / Spark Erosion Machines & Many More....

Flow :  1 Ltrs/min to 520 Ltrs/min
Head :  1 Mtr. To 26 Mtr.
M.O.C:  GFRPP/ PVDF or S.S.316